Detect
up to 50,000 PPM VOCs including methane CONFIDENTLY
and RELIABLY.
For
accurate, reliable detection of VOCs in fugitive
emissions or environmental applications, the
Photovac MicroFID is the right choice in flame
ionization detection. At just 8.1 lb. (3.7 kg),
the MicroFID is the smallest and lightest data
logging Flame Ionization Detector (FID) available.
Easy
to learn and use
One tutor key prompts you through basic operations.
Critical data is displayed and logged in less
than three seconds within the concentration
range of 0.1-50,000 PPM. A simple two-step calibration
holds for a full workday.
Designed
for field use
The MicroFID is completely self-contained in
a single hand-held package, so transportation
and operation are simplified. The MicroFIDs
ergonomic design includes a built-in handle
and a rubberized keypad that can be used while
wearing protective equipment. Replaceable and
rechargeable battery packs operate for as long
as 15 hours. The MicroFID is classified as Intrinsically
Safe for both North America and Europe .
Rely
on results that measure up
For trouble-free measurement of soil gases where
the response factor consistency of an FID is
mandatory, or where methane must be included
in the total reading, the MicroFID has no equal.
Make
EPA Method 21 Fugitive Emissions Monitoring
easy with the smallest and lightest FID available,
the MicroFID.
|
|
An
optional Enhanced Probe is available which allows
single hand operation. Users do not need to
access the sidepack during operation. The TVA-1000B
is compact, so you can easily carry it anywhere
and its power and fuel supplies run for eight
hours on a full charge. Since safety is critical
to many applications, the unit is fully certified
intrinsically safe for use in Class I, Division
1, Groups A, B, C, & D. The TVA-1000B is
the ONLY over-the-shoulder portable vapor analyzer
to offer both photoionization and flame ionization
detectors in a single instrument. The system
is a cost effective tool for helping to meet
today's requirements for a healthier and safer
workplace, as well as a cleaner environment.
With its dual design, on-board datalogging and
multipoint calibration, the TVA-1000B increases
productivity, and efficiency, and provides accuracy
over a broader range. You no longer need to
carry a second analyzer and a clipboard. Overall
monitoring time is reduced because the number
of vapors detected per scan is greater and scribing
time is eliminated. In addition, on-board datalogging
improves the integrity of the data by eliminating
transcription errors. TVA-1000B is built for
fast, simple operation in real-world field conditions.
A large keypad ensures straight-forward, easy
operation, with or without gloves. Datalogging
is activated by a thumb-switch on the hand held
probe. Operations are menu-driven and displays
are bright and easy to read.
FEATURES
Improved Efficiency
- Simultaneous photoionization and flame ionization
- On-board datalogging
- Multipoint calibration
- Multiple calibration curves
Simple to Use
- Menu driven operation
- Easy to read LCD displays
- Large keypad
- Datalogging thumb-switch on hand-held sample
probe
- Automatic autoranging
- Diagnostics
Designed For Field Conditions
- Over the shoulder portable
- 8 hour portable operation time
- Intrinsically safe for Class I, Division 1,
Groups A, B, C, & D
Optional Enhanced Probe
- 16 x 20 character readout
- Flame re-ignite
- Menu driven probe operation
- Routing functions
|
|