| |
.
|
|
| TSI
Q-Trak IAQ Monitor |
FEATURES
TSI offers two models of the hand-held Q-TRAK™
Plus IAQ Monitors, both of which measure the most
important parameters for IAQ studies. The Q-TRAK
Plus Model 8552 monitor simultaneously measures
carbon dioxide, temperature and humidity, all
within a single probe. The Q-TRAK Plus with CO
Model 8554 monitor measures those same parameters,
with the addition of carbon monoxide.
For
example, you can program the Q-TRAK Plus IAQ
Monitor to log data once per minute for more
than 30 full days. The Q-TRAK Plus operates
for over 20 hours on four AA batteries (included),
or an AC adapter (included) offers continuous,
unattended operation.
The
Q-TRAK Plus IAQ monitor comes with TRAKPRO Data
Analysis Software for Windows®. TRAKPRO
software allows you to program the Q-TRAK Plus
Indoor Air Quality monitor for custom data logging
sessions, download the data into your PC and
create, view and print presentation quality
charts illustrating how indoor air quality changes
over time.
ACCESSORIES
Carrying case
AA Alkaline batteries (4)
AC adapter
TRAKPRO Data Analysis Software for Windows with
manual
Probe stand
Computer cable
Operation and Service Manual
Calibration certificate
CO2 calibration adapter
|
 |
|
[BACK
TO TOP]
[VIEW
PRODUCT SPECIFICATIONS,PDF]
|
| Metrosonics
AQ5000 IAQ |
The
Professional Choice
Metrosonics IAQ monitors reflect 26 Years of experience
engineering and developing high quality, state
of the art instrumentation. Through continuous
improvements in engineering design and manufacturing
methods, our IAQ monitors deliver unmatched convenience,
versatility, and value.
Mutifunctional
The aq-5000/aq-5001 can be programmed to perform
as either a survey or datalogging monitor. In
survey mode snap-shots of all the IAQ data are
taken at discrete points. Survey mode would
typically be used during the course of a building
walk-through. In datalogging mode the monitor
transforms into a continuous profiling recorder
to analyze IAQ trends. Datalogging mode is typically
used in situations where long term unattended
monitoring is required.
Rugged
and Easy to Use
The handheld aq-5000 is housed in a rugged,
lightweight industrial grade anodized aluminum
enclosure. Four operator controls, intuitive
prompts, and an easy to read Liquid Crystal
Display make it ready to use at a moments notice.
The portable aq-5001 houses the aq-5000 handheld
monitor in a rugged lockable enclosure which
is ideal for secure, unattended long-term monitoring.
As an added benefit, the aq-5001 can be checked
as baggage and shipped via ground or airfreight
service "as is".
Multiple
Reporting Options
The aq-5000 can be connected directly to a serial
printer and print formatted reports of summary
data and time history profiles. To further analyze
the data, connect the aq-5000 to a computer
serial port and upload the data into Metrosoft
software for Windows®. This powerful software
provides many options for analyzing, graphing,
reporting, and calculating air exchange rates.
Pollutants
Measured:
Carbon
Dioxide
Temperature
Relative Humidity
Gas Sensors Available:
Carbon Monoxide
Hydrogen Sulfide
Nitrogen Dioxide
Hydrogen Cyanide
Oxygen
Sulfur Dioxide
Chlorine
Nitric Oxide
Ammonia
Third Party Support for:
VOC's
Respirable Dusts
Linear Output devices
Air Velocity
Pressure
Multiple Power Options:
"AA" alkaline
Rechargeable NIMH
AC power
|
 |
|
[BACK
TO TOP]
[VIEW
PRODUCT SPECIFICATIONS,PDF]
|
| TSI
P-Trak Ultrafine Particle Counter |
| The
P-Trak Ultrafine Particle Counter uses the same
fundamental technology behind TSI's condensation
particle counters (CPCs), well-proven instruments
that have been used in research and industrial
applications around the world for many years.
In fact, CPCs have been used for decades to track
and record particle sources. The P-Trak UPC comes
with everything you need to start solving tough
IAQ problems. Battery operated, it goes wherever
you need to go. With programmable data logging
capability, you can take the measurements back
to your office for further study.
It's
a simple matter to download data for inclusion
in special reports, for permanent record keeping,
or for comparison with measurements taken on
a previous date.
This
technique provides far greater sensitivity to
smaller particles than traditional instruments.
Many particles that are below the range of traditional
particle counters are easily seen by the P-Trak
Ultrafine Particle Counter.
P-Trak
Model 8525 Ultrafine Particle Counter Specifications
- Concentration Range 0 to 5 x 105 particles/cm3
- Particle Size Range 0.02 to greater than 1
micrometer
- Temperature Range Operation 32 to 100°F
(0 to 38°C) Storage -40 to 160°F (-40
to 70°C)
- Flow Rate Sample 100 cm3/min Total 700 cm3/min
(nominal)
- Power Requirement Battery type 6 AA alkaline
Battery life 6 hrs at 70°F (21°C)
Hours per charge 8 hours at 70°F (21°C)
RS232 Output Baud rate 9600
- Alcohol Requirement Type 100% reagent grade
isopropyl -
- Size 10.75 in. x 5.5 in. x 5.5 in. (27 cm
x 14 cm x 14 cm)
- Carrying Case Size 21 in. x 14 in. x 8.3 in.
(53 cm x 36 cm x 21 cm)
- Weight Instrument with 3.8 lbs (1.7 kg) batteries
Instrument with 16.8 lbs (7.7 kg)
accessories in case Shipping Weight 23 lbs (10.5
kg)
- Factory Recalibration One year
- Interval Warranty Two years on parts and labor
- Computer Requirements PC with Microsoft Windows®
95, 98 or NT; Windows-compatible
printer; 5 MB hard disk space; and available
RS232 serial port (for downloading)
|
 |
|
[BACK
TO TOP]
[VIEW
PRODUCT SPECIFICATIONS,PDF]
|
.
|
|
