|
.
|
YSI
6920 Multparameter Instrument |
A
cost-effective logging unit rated at 200 feet,
the YSI 6920 can monitor up to 14 parameters simultaneously,
including oxygen with the YSI Rapid PulseTM stirring-independent
sensor and turbidity sensor not affected by variations
in ambient light that has a self-cleaning feature.
A self-cleaning chlorophyll sensor may be installed
instead of the turbidity sensor.
The
YSI 6920 is an economical logging system for
long-term, in situ monitoring and profiling.
It will log all parameters at programmable intervals
and store 150,000 readings. At 15-minute intervals,
it will log data for about 30 days.
Battery
cells in a sealed compartment provide up to
3-months deployment (depending upon number of
parameters). Non-volatile flash memory (384K)
prevents data loss. RS-232 and SDI-12 are standard;
the unit interfaces with the YSI 6200 Data Acquisition
System, your own data collection platform, or
a YSI 650 Multiparameter Display System for
long-term deployment. Retrieve data on site
or remotely via radio, phone, or satellite.
All
the YSI 6-Series sondes can be used with YSI
EcoWatch for Windows software. EcoWatch is communication
and data processing software that is fast and
easy-to-use. See the whole picture with a single
program, obtain statistics easily, merge data
files, and run large studies.
FEATURES
On-board memory and power
Measures all parameters simultaneously
Log to depths of 200 feet
Memory holds 150,000 readings
Field-replaceable probes
3 ISE's, ammonia, nitrate and chloride simultaneously,
plus
pH and ORP
CE compliant
|
|
[BACK
TO TOP]
|
YSI
6820 Multiparameter Instrument |
A
cost-effective sampling system with 14-parameter
reporting capability, the YSI 6820 is ideal for
profiling and spot-checking in lakes, rivers,
wetlands, wells, estuaries, and coastal waters.
The YSI 6820 measures nine parameters simultaneously,
including dissolved oxygen, using the YSI Rapid
PulseTM stirring-independent sensor and turbidity
or chlorophyll, using a sensor with a self-cleaning
feature for long deployments, or a standard sensor
for simple sampling. Even though the YSI 6820
is small in size it is designed to sink without
additional weight.
RS-232
and SDI-12 are standard; the YSI 6820 easily
interfaces with a YSI 6200 Data Acquisition
System, many other data collection platforms
for long-term deployment, or a YSI 650 Multiparameter
Display System for sampling.
All
YSI 6-Series sondes can be used with YSI EcoWatch
for Windows software. EcoWatch is communication
and data processing software that is fast and
easy-to-use. See the whole picture with a single
program, obtain statistics easily, merge data
files, and run large studies.
FEATURES
Ideal for sampling
Easy connection to the YSI 650 Handheld Multiparameter
Display System or YSI 6200 Data Collection Platform
Field-replaceable probes
CE compliant Retrieve data on-site or remotely
via radio, phone or satellite
|
|
|
YSI
600 XL Multiparameter Instrument |
Measure
up to six water quality parameters, including
water level that is vented to the atmosphere.
Achieve an unprecedented accuracy of +0.01 feet
from 0 to 10 feet, +0.06 feet from 10 to 30 feet.
Rapid PulseTM stirring-independent dissolved
oxygen
measurement
ORP, pH and industry-leading specifications
for
conductivity and temperature are measured simultaneously
with dissolved oxygen.
All probes are field-replaceable. This combination
makes
the compact YSI 600XL your best choice for water
quality monitoring with a data collection platform
where water level is critical.
Connect the YSI 600XL easily to the YSI 6200
Data Acquisition System, the YSI 6500 Environmental
Process Monitor, or the YSI 650 Multiparameter
Display System.
All
the YSI 6-Series sondes can be used with YSI
EcoWatch for Windows software. EcoWatch is communication
and data processing software that is fast and
easy-to-use. See the whole picture with a single
program, obtain statistics easily, merge data
files, and run large studies.
FEATURES
Small, compact instrument easily fits into 2-inch
wells
Salinity and total dissolved solids are also
calculated
parameters
Stirring-independent Rapid Pulse oxygen sensor
saves
energy
Measures to depths of 200 feet (61m)
CE compliant
|
|
[BACK
TO TOP]
|
YSI
600 XLM Multiparameter Instrument |
The
YSI 600XLM provides economical logging in a small
package for both surface water and groundwater.
It easily fits into 2-inch wells and measures
a range of fundamental parameters, including oxygen
with the YSI Rapid PulseTM stirring-independent
dissolved oxygen sensor, and level using a highly
accurate vented sensor.
The
YSI 600XLM will log all parameters at programmable
intervals and stores 150,000 readings. At 15-minute
intervals, it will log data for about 30 days.
All
the YSI 6-Series sondes can be used with YSI
EcoWatch for Windows software. EcoWatch is communication
and data processing software that is fast and
easy-to-use. See the whole picture with a single
program, obtain statistics easily, merge data
files, and run large studies.
FEATURES
Measures dissolved oxygen, conductivity, temperature,
pH, ORP and vented level or depth
Logs all parameters at programmable intervals
and stores
150,000 readings
Logs data for about 30 days at 15-minute intervals
Probes are field-replaceable
Salinity and total dissolved solids are also
calculated
parameters
Stirring-independent dissolved oxygen sensor
Measures to depths of 200 feet
Easy-to-change internal batteries
CE compliant
|
|
[BACK
TO TOP]
|
Horiba
U-22 Multiparameter Instrument |
Years
of Horiba sensor technology development have reached
their culmination in the form of a 46-mm diameter
sensor probe.
These units offer a compact, highly accurate monitoring
solution with high pressure tolerance, long term
continuous measurement capabilities, waterproof
construction, and monitoring of up to 13 parameters.
In addition to the Water Quality Monitoring Systems
own capabilities, it was designed by Horiba to
be compatible with GPS and other data processing
techniques. And now, the U-20 series is available
with a detachable cable and flow through cell
designed by Horiba.
SIMULTANEOUS
MEASUREMENT OF 10 PARAMETERS:
pH
Dissolved Oxygen
Conductivity
Salinity
Total Dissolved Solids
Seawater Specific Gravity
Temperature
Turbidity
Depth
Oxidation Reduction Potential
FEATURES
One Touch Calibration Just submerge the
probe into the
calibration beaker filled with standard solution
and press the button for simultaneous one-point
calibration. The system also enables two-point
calibration where high precision measurement
data is required.
Probe assembly fits inside 2-inch well (U-22
only)
Data Logging Capability The sensors
built in memory
function enables continuous measurement for
as long as one month (with measurements every
15 minutes).
Simultaneous Measurement of up to 13 Parameters
10
parameters with U-22 Model and 13 parameters
with U-23 Model.
Measurement at Depths up to 100 Meters
High-Precision Dissolved Oxygen Sensor
This quick
response sensor requires no stirring.
System Enables GPS, PC, and Printer Capabilities
|
|
[BACK
TO TOP]
[VIEW
PRODUCT SPECIFICATIONS,PDF]
|
QED
Micropurge Basics Flow Cell MP20 |
The
MicroPurge® basicsTM MP20 Flow Cell
from the leaders in low-flow ground water sampling
sets new standards in performance, size
and price for purge water quality monitors. QED-exclusive
PurgeScanTM technology (U.S. Patent No. 6,415,659)
signals when stabilization has been achieved for
selected water quality parameters, with automatic
storage of key data points.
Two
upgrades enhance performance even further. One
option offers fast PC download capability. The
other option also adds a technology breakthrough
turbidity sensor in addition to pH, ORP, DO,
temperature, and conductivity.
The
lightweight, waterproof MP20 meter is simple
to field calibrate. It displays all readings
automatically. The sonde is a compact, low-profile
design with rugged, easy-to-service probes.
The flow cell is designed to collect and vent
gas bubbles effectively, and to distribute purge
flow evenly for quick measurement response and
more accurate readings.
The
whole package is protected by a 3-year warranty,
backed by service and support from QED, the
leader in low-flow sampling.
QED
PurgeScanTM technology assures stabilization
Successful, consistent low-flow sampling is
based on knowing when purge water indicator
parameters stabilize. This allows sampling to
begin only when the pump discharges samples
representative of the formation water.
Until
now, deciding when stabilization had been achieved
was complex, requiring you to monitor multiple
parameters and make repeated calculations. The
MP20 Flow Cell simplifies this process. Microprocessor-based
PurgeScanTM technology performs the monitoring
and calculation, clearly signaling when stabilization
has occurred.
This
makes low-flow sampling easy. You can do it
the right way, collecting the most accurate
samples, and saving time and money.
Engineered
for performance and field readiness
The MP20 flow cell is engineered to allow the
probe to make rapid, accurate responses to changes
in purge water parameters. The flow cell is
100% transparent for observation. The low-volume,
fast-response cell couples to the sonde with
a quick, bayonet attachment, and can be used
in either a horizontal or vertical position.
The
incoming flow is directed in a tangential path
around the flow cell to provide fast, thorough
mixing with no "dead spots" that could
affect the accuracy of purge parameter measurements.
Bubbles in the flow stream are vented out of
the cell and away from the probe so they don't
interfere with purge water analysis.
The
multiparameter probe has a special sensor with
built-in stirring for highly stable dissolved
oxygen readings. All sensors are easy to calibrate
and the reference electrode is fully field-serviceable.
The
large display screen makes it easy to see your
purging status. Power by standard C cells keeps
you on top of the job all day with no energy
supply worries.
|
|
[BACK
TO TOP]
|
.
|
|